Free Download Relays Standard Device number

Protective Relays & SCADA Systems
Aim of this standard is to arrive at a complete communication solution for substations, thus providing users with interoperability among different makes on the basis of Ethernet technology.


Numerical Protection Relays
The goal of this standard is to achieve an object-oriented communication structure within substations.
SIPROTEC protection relays and bay control units are the first to feature the IEC 61850 standard.With the substation configurator, a part of DIGSI 4, SIPROTEC units as well as other makes can be configured in accordance with IEC 61850.


ANSI Standard Device Numbers
The system uses numbers 1 through 99. Some numbers are left blank for assignment to special functions which may be used within a particular company.This numbering system will be employed on: One-Line Diagrams, Three-Line Diagrams, and Control Schematics



Peculiarities of the relays intended
Parameters of the subminiature electromagnetic relays used as output elements in microprocessor relay protection, do not correspond to technical specifications on these relay protection. The reasons of this discrepancy are analyzed.the switching capacity of relay contacts is determined by the area of contact surface, contacts mass, contact force and contact gap.


IEEE (ANSI) Device Number 16
In electric utility and industrial applications, Ethernet local area networks (LANs) and wide area
networks (WANs) are being used for message transmission to carry out high-speed control and
protection.


1 to 99 ANSIStandard Device Number



List of Device Numbers
denote what features a protective device supports (such as a
relay or circuit breaker). These types of devices protect electrical systems and components from damage when an unwanted event occurs, such as an electrical fault


Facilities Instructions, Standard and Techniques
Relays and relay settings are not to be changed from what is indicated on current issues of relay data sheets unless authorized by regional or project personnel with the proper responsibility. A sufficient number of initial operations should be made by manually operating relay contacts to make sure that all devices which should be operated by the relay, function freely and properly, including auxiliary contacts and targets within the relay.


Relay symbols and device numbers
Protection relay The asterisk must be replaced by one or more letters or qualifying symbols indicating the parameters of the device



IEEE C37.2
Probably the oldest IEEE standard still in regular use. It was first published in 1928
as AIEE No. 26, and provided a language to describe “automatic substations” as well as other applications.



BE1-Numerical Relay System Features
For example, a time over current relay  is designated a 51 device, while an instantaneous overcurrent is a 50 device. Multifunction relays have  combination's of device numbers.


ANSI Standard
With explaination in each Device Designation. Used only for specific applications in individual installations where none of the assigned numbered functions from 1 to 94 are suitable, Auxiliary Devices